Is the Cedar River flooding?
The Cedar River is tracked by 7 USGS streamgauges in Washington. This page compares each gauge’s live water level against its official National Weather Service flood stage, refreshed every 15 minutes, so you can tell whether the Cedar River is running normal, rising toward flood stage, or already flooding. 2 of 7 gauges have both a usable water-level reading and a published minor flood stage. Gauges without a published flood stage show water level and flow only. For nearby rivers, see all Washington river levels.
River facts
The longest-running gauge on this river is Cedar River near Landsburg, WA. The highest level ever recorded there was 13.55 ft on 29 December 1917, carrying 7,500 cfs. Peak records there go back to 1896 (126 annual peaks). It is currently at 1.00 ft, 12.6 ft below that record.
| Gauge | Status | Stage | Flood stage | Updated |
|---|---|---|---|---|
| Cedar River near Landsburg, WA | No flooding | 1.00 ft | 5.7 ft | |
| Cedar River at Renton, WA | No flooding | 7.95 ft | 13 ft | |
| Cedar River below Bear Creek near Cedar Falls, WA | No flood stage defined | 0.91 ft | — | |
| Cedar River near Cedar Falls, WA | No flood stage defined | 2.23 ft | — | |
| Cedar River at Powerplant at Cedar Falls, WA | No flood stage defined | 31.40 ft | — | |
| Cedar River at Cedar Falls, WA | No flood stage defined | 5.42 ft | — | |
| Cedar River below Diversion near Landsburg, WA | No flood stage defined | 2.39 ft | — |