Is the Dead Run flooding?

Maryland · 3 gauges · Maryland river levels

The Dead Run is tracked by 3 USGS streamgauges in Maryland. This page compares each gauge’s live water level against its official National Weather Service flood stage, refreshed every 15 minutes, so you can tell whether the Dead Run is running normal, rising toward flood stage, or already flooding. 3 of 3 gauges have both a usable water-level reading and a published minor flood stage. Gauges without a published flood stage show water level and flow only. For nearby rivers, see all Maryland river levels.

data refreshed 15 min ago

Readings may be delayed; check each observation time below. This gauge summary does not rule out flooding on unmonitored stretches or nearby streets.

River facts

The longest-running gauge on this river is Dead Run at Franklintown, MD. The highest level ever recorded there was 12.50 ft on 22 June 1972, carrying 7,400 cfs. Peak records there go back to 1960 (54 annual peaks). It is currently at 0.32 ft, 12.2 ft below that record.

Drains 6 sq mi · gauge elevation 303 ft · source: USGS peak-flow record

GaugeStatusStageFlood stageUpdated
Dead Run near Catonsville, MDNo flooding0.32 ft9 ft
Dead Run at Woodlawn, MDNo flooding0.27 ft9 ft
Dead Run at Franklintown, MDNo flooding0.32 ft10 ft
Provisional data: Real-time readings are provisional and subject to revision by the USGS — sensors can be affected by ice, debris, or equipment malfunction. Do not rely on this site for decisions involving personal safety; follow official guidance from the National Weather Service and local authorities.